Many videographers adopt logarithmic (Log) profiles under the assumption that they are the digital equivalent of motion picture film, but this technical comparison is often inaccurate. While Log was popularized by the ARRI Alexa in 2010 to allow for greater dynamic range recovery in post-production, it is not a direct substitute for the chemistry of film, which is typically shot with proper exposure and corrected during the printing process.
Log vs. Film: A Technical Distinction
A common misconception in the industry is that Log-encoded clips provide the same workflow as traditional film. In reality, motion picture film negatives are typically captured with proper exposure and then color-corrected by a film timer. While film might be scanned into a Cineon color space, this process differs fundamentally from the mathematical compression of a Log curve.
Digital Log and Camera Raw were introduced to solve specific problems: capturing a wide dynamic range that can be adjusted later. However, because different manufacturers (such as Sony, ARRI, and Panasonic) use different color sciences, these profiles often require complex LUTs to return the image to a standard Rec. 709 space.
“Using camera log profiles is often a crutch for location and studio set-ups.”
— Stop Filming in Log
The Risks of Over-Reliance on Log Profiles
Using a Log profile can become a 'crutch' for location and studio setups where the lighting is not optimized. A frequent issue occurs when a videographer shoots Log incorrectly—specifically by underexposing the shot—expecting to recover the detail in post-production. This same risk applies to shooting in Camera Raw or HDR modes.
Sony’s variety of profiles, including S-Log and S-Cinetone, adds further complexity to the workflow. While S-Cinetone is noted for adding 'filmic' qualities with high contrast in low luminance and softer highlights, the consistency of the final grade can vary significantly depending on the specific camera's implementation.
HDR and the Limits of Human Perception
High Dynamic Range (HDR) video presents unique challenges because it does not mirror how the human eye functions. In a dark room with a bright window, the eye 'stops down' to see the room or 'opens up' to see the sky; it does not see both at full detail simultaneously. HDR video systems that reproduce both simultaneously can result in a painful viewing experience.
Unless a project specifically requires an HDR delivery, experts suggest avoiding HDR modes in favor of correctly lit Rec. 709 footage. This approach often yields a more consistent result that is easier to manage during the color grading phase.
What Hacker News readers are saying
- Alternative: One commenter argued that the primary purpose of shooting in Log is to prevent quantization or clipping from discarding information, suggesting that users can apply inverse transfer functions in post-production rather than squashing to Rec.709 in-camera. comment ↗
- Skeptical: Another user expressed skepticism toward the article's claims, noting that they personally used Log to capture a wider color gamut and avoid in-camera processing while still attempting to nail the initial exposure. comment ↗
- Technical note: A commenter suggested that Log is an idealized mathematical concept that does not perfectly correspond to how a sensor records data or how a monitor displays it, viewing it primarily as an intermediate step for post-processing. comment ↗
Summarized opinions from the Hacker News thread, not verified facts. Read the full discussion ↗